How To Mine Bitcoin Using ASIC USB Block Erupters and BitMinter

Enter the characters you see below Sorry, we just need to make sure you’re not a robot. Disabling it how To Mine Bitcoin Using ASIC USB Block Erupters and BitMinter result in some disabled or missing features. You can still see all customer reviews for the product. This item is very well made.

Case is a pretty painted aluminum. The device I have is running with the case off with a better than stock fan. It runs cool at a temperature of about 37C. The heat sink is cool to the touch. You will require a PC with an internet connection to run the mining software. It connects to the PC via USB.

1xBit Casino Review

You can use cgminer, bfgminer or bitminter. It may run with others mining programs as well. Please note that these will vary and performance will also depend to some degree with which pool you are connected. I think that the performance also depends at the temperature that it is running at and the additional performance that I am getting may be due to the open case and upgraded fan. The fan is an 80mm fan and replaces the stock 80mm fan. When buying one of these, it is very important to compare these with other bitcoin mining options and the current mining difficulty.

Thus, this device will mine about 1. 6 months or a total of 6. 5 BTC in the first year. 12 month mining amount is about 3. You can do these calculations in a spreadsheet.

Due to the effect described above, when buying one of these, the longer it takes before you receive it will dramatically change the total amount of BTC it will mine. The power draw is very low and this device should be profitable to run for a reasonably long time even if the BTC amount it earns is small. 7, if you do not already have a constantly running system, you will have to its additional power usage to the mining costs. There are very some low power systems you can use, some based on a raspberry pi. 9 of the USB erupters, a USB hub and a USB fan. 60 days and historically much longer.

There was a problem filtering reviews right now. There was a problem loading comments right now. This thing has been great out of the box. I’m using the software I downloaded from Butterfly Labs. I did install a couple additional heat sinks and an extra fan to help keep it cool. It’s not required by any means, but all electronics run better when they’re not super hot.

How to Mine with 6 GPU

Shipped as noted, item arrived safe and secure. Completely simple to connect, and to setup with specific software freely available online. No Drivers or install supplied Avoid these. OS does not recognize it same with bitminter client. No instructions either, not even a URL to download drivers.

Recommend antminer, that one worked as expected. Whoa there, keep your hand out of that pocket, Sparky! 376, so I can’t imagine why anyone would be willing to pay much money for this slower than treacle paperweight. 95 it would be an interesting toy for those curious about crypto-currency, other than that, search Amazon for “Butterfly Labs” to see much better choices.

I had one of these and it mined great for the three months I used it while Bitcoin difficulty was low enough to make any ROI. Today, if you’re buying this for anything more than shear novelty then you are wasting your money. You will never break even at the current difficulty trying to mine Bitcions. The difficulty rate increases all the time so as time goes on you would earn less and less. This is truly a insane price.

I own 2 of these and they are good and easy to set up but if you buy this at this price you will never get any ROI. Seems the seller is just looking to take a lot of cash out of someone’s bank account. Please make sure that you are posting in the form of a question. Enter the characters you see below Sorry, we just need to make sure you’re not a robot. Disabling it will result in some disabled or missing features. You can still see all customer reviews for the product.

This item is very well made. Case is a pretty painted aluminum. The device I have is running with the case off with a better than stock fan. It runs cool at a temperature of about 37C. The heat sink is cool to the touch. You will require a PC with an internet connection to run the mining software. It connects to the PC via USB.

Jamie Holmes – Editor – BTC Manager

You can use cgminer, bfgminer or bitminter. It may run with others mining programs as well. Please note that these will vary and performance will also depend to some degree with which pool you are connected. I think that the performance also depends at the temperature that it is running at and the additional performance that I am getting may be due to the open case and upgraded fan.

Sigma Iota Epsilon

The fan is an 80mm fan and replaces the stock 80mm fan. When buying one of these, it is very important to compare these with other bitcoin mining options and the current mining difficulty. Thus, this device will mine about 1. 6 months or a total of 6.

5 BTC in the first year. 12 month mining amount is about 3. You can do these calculations in a spreadsheet. Due to the effect described above, when buying one of these, the longer it takes before you receive it will dramatically change the total amount of BTC it will mine. The power draw is very low and this device should be profitable to run for a reasonably long time even if the BTC amount it earns is small.

7, if you do not already have a constantly running system, you will have to its additional power usage to the mining costs. There are very some low power systems you can use, some based on a raspberry pi. 9 of the USB erupters, a USB hub and a USB fan. 60 days and historically much longer. There was a problem filtering reviews right now.

There was a problem loading comments right now. This thing has been great out of the box. I’m using the software I downloaded from Butterfly Labs. I did install a couple additional heat sinks and an extra fan to help keep it cool. It’s not required by any means, but all electronics run better when they’re not super hot. Shipped as noted, item arrived safe and secure.

iPhone7 Enables Bitcoin Payments, Ethereum Classic Might be Next

Completely simple to connect, and to setup with specific software freely available online. No Drivers or install supplied Avoid these. OS does not recognize it same with bitminter client. No instructions either, not even a URL to download drivers. Recommend antminer, that one worked as expected. Whoa there, keep your hand out of that pocket, Sparky! 376, so I can’t imagine why anyone would be willing to pay much money for this slower than treacle paperweight.

95 it would be an interesting toy for those curious about crypto-currency, other than that, search Amazon for “Butterfly Labs” to see much better choices. I had one of these and it mined great for the three months I used it while Bitcoin difficulty was low enough to make any ROI. Today, if you’re buying this for anything more than shear novelty then you are wasting your money. You will never break even at the current difficulty trying to mine Bitcions.

The difficulty rate increases all the time so as time goes on you would earn less and less. This is truly a insane price. I own 2 of these and they are good and easy to set up but if you buy this at this price you will never get any ROI. Seems the seller is just looking to take a lot of cash out of someone’s bank account. Please make sure that you are posting in the form of a question.

Enter the characters you see below Sorry, we just need to make sure you’re not a robot. Disabling it will result in some disabled or missing features. You can still see all customer reviews for the product. This item is very well made. Case is a pretty painted aluminum. The device I have is running with the case off with a better than stock fan.

It runs cool at a temperature of about 37C. The heat sink is cool to the touch. You will require a PC with an internet connection to run the mining software. It connects to the PC via USB. You can use cgminer, bfgminer or bitminter. It may run with others mining programs as well.

404 Not Found

Please note that these will vary and performance will also depend to some degree with which pool you are connected. I think that the performance also depends at the temperature that it is running at and the additional performance that I am getting may be due to the open case and upgraded fan. The fan is an 80mm fan and replaces the stock 80mm fan. When buying one of these, it is very important to compare these with other bitcoin mining options and the current mining difficulty.

Thus, this device will mine about 1. 6 months or a total of 6. 5 BTC in the first year. 12 month mining amount is about 3. You can do these calculations in a spreadsheet. Due to the effect described above, when buying one of these, the longer it takes before you receive it will dramatically change the total amount of BTC it will mine.

The power draw is very low and this device should be profitable to run for a reasonably long time even if the BTC amount it earns is small. 7, if you do not already have a constantly running system, you will have to its additional power usage to the mining costs. There are very some low power systems you can use, some based on a raspberry pi. 9 of the USB erupters, a USB hub and a USB fan. 60 days and historically much longer.

Tom McClellan: Finally, An Actual Use For Bitcoin

There was a problem filtering reviews right now. There was a problem loading comments right now. This thing has been great out of the box. I’m using the software I downloaded from Butterfly Labs.

I did install a couple additional heat sinks and an extra fan to help keep it cool. It’s not required by any means, but all electronics run better when they’re not super hot. Shipped as noted, item arrived safe and secure. Completely simple to connect, and to setup with specific software freely available online. No Drivers or install supplied Avoid these. OS does not recognize it same with bitminter client.

No instructions either, not even a URL to download drivers. Recommend antminer, that one worked as expected. Whoa there, keep your hand out of that pocket, Sparky! 376, so I can’t imagine why anyone would be willing to pay much money for this slower than treacle paperweight. 95 it would be an interesting toy for those curious about crypto-currency, other than that, search Amazon for “Butterfly Labs” to see much better choices. I had one of these and it mined great for the three months I used it while Bitcoin difficulty was low enough to make any ROI. Today, if you’re buying this for anything more than shear novelty then you are wasting your money.

You will never break even at the current difficulty trying to mine Bitcions. The difficulty rate increases all the time so as time goes on you would earn less and less. This is truly a insane price. I own 2 of these and they are good and easy to set up but if you buy this at this price you will never get any ROI. Seems the seller is just looking to take a lot of cash out of someone’s bank account.

What is the difference between drivechain and extension blocks?

Please make sure that you are posting in the form of a question. Enter the characters you see below Sorry, we just need to make sure you’re not a robot. Disabling it will result in some disabled or missing features. You can still see all customer reviews for the product. This item is very well made. Case is a pretty painted aluminum. The device I have is running with the case off with a better than stock fan.

It runs cool at a temperature of about 37C. The heat sink is cool to the touch. You will require a PC with an internet connection to run the mining software. It connects to the PC via USB. You can use cgminer, bfgminer or bitminter. It may run with others mining programs as well.

Please note that these will vary and performance will also depend to some degree with which pool you are connected. I think that the performance also depends at the temperature that it is running at and the additional performance that I am getting may be due to the open case and upgraded fan. The fan is an 80mm fan and replaces the stock 80mm fan. When buying one of these, it is very important to compare these with other bitcoin mining options and the current mining difficulty. Thus, this device will mine about 1. 6 months or a total of 6. 5 BTC in the first year.

12 month mining amount is about 3. You can do these calculations in a spreadsheet. Due to the effect described above, when buying one of these, the longer it takes before you receive it will dramatically change the total amount of BTC it will mine. The power draw is very low and this device should be profitable to run for a reasonably long time even if the BTC amount it earns is small. 7, if you do not already have a constantly running system, you will have to its additional power usage to the mining costs.

There are very some low power systems you can use, some based on a raspberry pi. 9 of the USB erupters, a USB hub and a USB fan. 60 days and historically much longer. There was a problem filtering reviews right now. There was a problem loading comments right now. This thing has been great out of the box.

I’m using the software I downloaded from Butterfly Labs. I did install a couple additional heat sinks and an extra fan to help keep it cool. It’s not required by any means, but all electronics run better when they’re not super hot. Shipped as noted, item arrived safe and secure. Completely simple to connect, and to setup with specific software freely available online. No Drivers or install supplied Avoid these.

OS does not recognize it same with bitminter client. No instructions either, not even a URL to download drivers. Recommend antminer, that one worked as expected. Whoa there, keep your hand out of that pocket, Sparky! 376, so I can’t imagine why anyone would be willing to pay much money for this slower than treacle paperweight. 95 it would be an interesting toy for those curious about crypto-currency, other than that, search Amazon for “Butterfly Labs” to see much better choices.